| |
- This shows how the Program NxD XP Client PC with Windows XP Embedded.
* Program NxD XP Program that is intended for connection to the Server Linux in the preparation of the image.
In the Windows XP on a Windows + Services pack 2 for the
partition of Windows is 10 GB it is to drive the rest up to the Format
on the down Windows and then close the Services such as Automatic
Updates,. Windows Firewal l and then close the System Restore and
Install. only. Driver. LAN. only after it is made up as follows.
How to install
1. Network Connections, double-click the Local area Connection (LAN), select Properties.
Two. Select Uninstall QoS Packet Scheduler and then make out.
3. Press Yes to delete.
4. Program Client-nxdclient Install Linux can be found in the Download. here.
Five. After the current program. 
6. Choose a language below, and press OK.
Seven. Click Next Step.
Eight. Select a Full Install, and press Install.
Nine. Then press Ok.
10. Click Close to restart the machine in order to provide the program. Fully functional.
11., And then turn off the machine.
12. Prepare the Hard disk that has Windows XP and Program NxD XP Client is already connected to the Server.Linux.
- At this stage we do not install the Server Linux. This
procedure is set so that the HDD with windows XP Server on the same
screen as shown below.
Stage is set.
A. OS Linux as a symbol of it.
Two. Will look like this. Then select the menu DiskMan.
Three. On opening up the menu DiskMan as shown below, then select Add.
4. Will be shown below, select the Open Raw Disk and click Next to do the next step.
Five. Picture below shows the Disk and select the address of the HDD Windows XP, we put in the Server Linux.
6. Disk Name: The name of the Disk Image. seventh. PHY Disk: select
Hard disk Windows is in the image below in the HDD is the second son of
the 1 dev / sda is the Server Linux client that is 2 dev. / sdb is
where we put it to windows XP. 8. The second option, then press Ok.
Nine. Press Yes.
10th. Will look like as shown below, then press Close.
- Set the profile of this step is that we want to have a PC and
Disk Less in the number of machines we need to configure the Server
Linux.
The NxD XP Boot Manager program.
an. to Click Programs NxD XP Boot Manager. as 001.
Two. To set the IO Server before it hit the IO Server and select Add IO Server. as 002.
Three. To enter the IP address to the Server (must be the same IP that I set it on Linux) and click OK. as 003.
Four. We have an IP server, then we click on the Disk Info Post by arrows. as 004.
Five. Will look like this and then press the Refresh. as 005.
6. The filename Image XP to just let them come to me and then Close
it. as 006. we define the IP address of the Server successfully.
Seven. Now Add our clients have chosen to use the Options menu, select Auto Add Wks the symbol below it. as 007.
8th. Are shown below in the Client Add Mode: Select the Manual - Add on Server and then press OK to sign it. as 008.
9th. To go to the menu. WKS. then select Add WKS. as 009.
10. We have information to add.
WKS Name: name of the client. What is it that we know what it is.
MAC: The MAC Address of the client down. Check out the PC with the system we want Disk Less click Run, type cmd, and then enter.
and type ipconfig / all as shown below. The numbers do not add it. The symbol on it.
IP: IP of the client from the command prompt, see here.
Mask: mask of the NET Sub Ip see it from the command prompt.
Gateway: Gateway to the use of the Internet. View from the command prompt it.
bootdisk: Select Image, we create it.
Config: Default.
11. Check the symbol as shown below, this is not a cup or something. When finished, press OK. as 010.
12th. Will come out this form. as 011.
 |
|
|
0 comments:
Post a Comment